1. Nanomaterials Synthesis & Self-assembly
Luminescent Bi-containing Phosphate-Molybdate Glass-Ceramics | |
Kateryna V Terebilenko, Sergii G Nedilko, Oleksandr Alekseev, Mykola Slobodyanik, Vitalii Chornii, Maksym Lazarenko, Volodymyr Boyko |
Investigation of Carbon, Manganese and Silicon Solubility in α-Iron of Fe-Mn-Si-C Alloys | |
Natalia Yu. Filonenko, O. O. Babachenko, G. A. Kononenko |
Organic/Inorganic Dual Network Hydrogels Based on Acrylic Acid and 2-Aminoethyl-3-Aminopropyltrimetoxysilane: Synthesis and Characterization | |
Olga Slisenko, Iryna Bei, Vira Budzinska, Oleksandr Tolstov |
Synthesis of Hybrid Partially Oxidized Nanodispersed Metal Particles with Simultaneous Surface Functionalization | |
Evgen Pashchenko, Denys Savchenko, Oksana Kaidash, Svitlana Kukharenko, Yulia Rumiantseva, Oleg Buriachek |
2. Thin Films & Coatings
The Nanocuticle Technology (ARTIficial CutiCLE: “ARTICLE”) to Improve the Hatching of Chicken Eggs in the Poultry Farms of Countries Affected by Global Warming | |
Olga Georgiivna Bordunova, Valeriy B. Loboda, Oksana I. Ivanova, Yevgeniya A. Samokhina, Тetyana O. Chernyavska, Vadym D. Chivanov |
Influence of Protective Nanocomposite Coatings on the State of Heat Flow in the Cutting Insert | |
Dmitrii Belous, Alexander Goncharov, Andrei Yunda, Aleksei Khomenko, Liudmila Vasilyeva, Svetlana Goncharova |
Solubility Size Effect in Pb/Ag Binary Films | |
Vladimir Nikolayevich Sukhov, Sergey Dukarov, Sergey Petrushenko, Olga Bulhakova, Alexander Nevgasivmov |
Increasing the Efficiency of Running-In the Titanium Nitride Nanostructures Formed on R6M5 and 12KH18N10T Steels by Sulphidizing with Electric Spark Alloying Method | |
Ievgen Konoplianchenko, Viacheslav Tarelnyk, Oksana Gaponova, Andrey Belous, Sergey Bondarev, Olha Vasilenko, Zhengchuan Zhang, Gennady Smolyarov, Yuriy Semirnenko, Svetlana Semirnenko, Anatolii Kutakh, Marina Mikulina, Vladislav Gerasimenko |
Properties of Detonation Coatings after Thermal Annealing | |
Dastan Buitkenov, Bauyrzhan Rakhadilov, Zhuldyz Sagdoldina, Rauan Kozhanova, Meruyert Maulet, Almasbek Maulit |
Oxidation of Sulfurated Polyacrylonitrile-Derived Nanostructured Activated Carbon Fibers for Thermal Resistant and Multifunctional Solid Acids | |
Luidmyla Grishchenko, Sofia Chernenko, Anna Vakaliuk, Ruslan Mariychuk, Tetiana Bezugla, Oleksandr Mischanchuk, Galyna Tsapyuk, Vitaliy E. Diyuk, Andrii Yatsymyrskyi, Olga Yu. Boldyrieva, Vladyslav Lisnyak |
Microstructure and Tribomechanical Properties of WN-based Binary Multilayer Protective Coatings | |
Kateryna Smyrnova, Martin Sahul, Alexander Pogrebnjak, Vyacheslav Beresnev, Vyacheslav Stolbovoy, Ľubomír Čaplovič, Martin Kusý, Marián Haršáni |
Multilayer and High-Entropy Alloy-Based Coatings for Solving the Critical Raw Materials Problem | |
Bogdan Postolnyi, Vladimir Buranich, Kateryna Smyrnova, João Pedro Araújo, Alexander Pogrebnjak, Vladyslav Rogoz |
4. Nanophotonics
Plasmon-Enhanced Fluorescence of Carbocyanine J-aggregates in Layered Polymer Films | |
Alexander Sorokin, Roman Grynyov, Irina Grankina, Irina Bespalova, Svetlana Yefimova, Yuri Malyukin |
Morphology, Optical and Electronic Characteristics of Nanocellulose Filled with Microcrystalline Cellulose and Graphene Oxide | |
Sergiy Nedilko, Valerii Barbash, Tetyna Kleshonok, Vasyl Scherbatskii, Mikita Shegeda, Olha Yashchenko, Vadim Sheludko, Olga Gomenyuk |
Tuning Optical Properties of AgInS2 Quantum Dots by the Change of Ag-In Stoichiometry for Their Light-emitting Applications | |
Yuriy Khalavka, Nataliia Doskaliuk, Yuriy Babyuk, Andrii Hotynchan, Galyna Okrepka |
6. Nanomagnetism & Magnetic Materials
Influence of Fe/Co Substitution and Nb Doping on Thermal Stability of Fe/Co-Si-B Alloys | |
Mariia Lopachak, Myroslava Kovbuz, Oksana Hertsyk, Tetiana Hula, Lidiya Boichyshyn, Khrystyna Khrushcyk |
Doping Effect of Metal Cations on the Physical-Chemical Properties of Nanomagnetite | |
Olesya Yuriivna Pavlenko, O. M. Lavrynenko, N. O. Dudchenko, O. B. Brik |
Features of the Mechanical Behavior and Structure of Ferromagnetic Shape Memory Nanocomposites | |
Anatoliy Titenko, Lesya Demchenko, Mustafa Babanli, Sayami Huseynov, Vusal Huseynov, Oleksii Titenko |
Magnetic Anisotropy in the Co-Al-Nitrate Layered Double Hydroxides with the Co/Al Ratios 2, 3, and 4 | |
Yuriy Georgii Pashkevych, Roman Babkin, Vasili Rubanik Jr., Vasili Rubanik, Aleksandr D. Shilin, Daniel E.L. Vieira, Andrei N. Salak, Jūras Banys |
Nanoscale Magnetic Properties of Additively Manufactured FeCoNiAlxMnx High-Entropy Alloys | |
Anthoula Poulia, Amin Azar, Peter Svec, Calliope Bazioti, Branson Belle, Anette Eleonora Gunnæs, Spyros Diplas, Pavlo Mikheenko |
Influence of Tilted Fields on Magnetization Reversal in Fe Nanodots | |
Andrea Ehrmann, Tomasz Blachowicz |
Magnetic Properties of Heavily Cr+-Implanted CdTe Single Crystals with Dopant-related Nanoclusters | |
Volodymyr Popovych, Shengqiang Zhou, Antoni Żywczak, Bogumil Cieniek, Ireneusz Stefaniuk, Roman Böttger, Marian Kuzma |
Handling of Magnetic Properties of Ferromagnetic Micro Scale Materials with Curvy Geometry | |
Valeria Kolesnikova, Nikolai Andreev, Andrei Bzlov, Montserrat Rivas, Valeria Rodionova |
A Cluster-glass Behavior of Co2+-Containing Layered Double Hydroxide Intercalated with Nitrate | |
Alexey Fedorchenko, Elena Fertman, Vasili V. Rubanik Jr, Vasili V. Rubanik, Daniel E.L. Vieira, Andrei N. Salak, Yurii Pashkevich, Roman Babkin |
Exchange inertia effects in artificial neural networks using antiferromagnetic oscillators | |
Hannah Bradley, Vasyl Tyberkevych |
Magnonic crystal based on YIG/hexaferite films | |
Vladyslav Kariachka, Volodymyr Malyshev, Oleksandr Prokopenko, Vladyslav Romaniuk, Viсtor Kostenko, Dmytro Bozhko |
8. Nanodevices & Sensors
Application of Nanocellulose in Humidity Sensors for Biodegradable Electronics | |
Viktoriia Koval, Valerii Barbash, Mykhailo Dusheyko, Vladyslav Lapshuda, Olga Yashchenko, Yuriі Yakimenko |
9. Nanomaterials for Energy & Environment
Effect of Precursor Type on Physico-Chemical and Photocatalytic Properties of TiO2-SnO2 Nanocomposites | |
Kateryna Bila, Tetiana Dontsova, Anastasiya Kutuzova |
The Influence of Nanosized Zirconium (IV) Oxide on the Catalytic Curing of Epoxy Resin ED-20 with Isomethyltetrahydrophthalic Anhydride | |
Evgeniia Bakhalova, Elena Shved, Yuliia Bespalko, Oksana Gorban, Kseniia Yutilova |
Functional Polymer Coated MoS2 Nanocomposites as Promising Lithium Current Sources | |
Oksana Balaban, N. Mitina, A. Zaichenko, O. Paiuk, Yu. Shermolovich |
Research of AC Electrical Properties of ZrC Nanocomposite Produced by Magnetron Sputtering | |
Vitalii Bondariev, Ihor Lebedynskyi |
Electrical Conductivity of Ceramics Based on(Cu1-xAgx)7SiS5I Nanocrystalline Powders | |
Artem Pogodin, Ihor Studenyak, Iryna Shender, Serhiy Bereznyuk, Michael Filep, Oleksandr Kokhan |
Technological Basis for the Production of Ammonium Nitrate with a Nanoporous Surface and Near-surface Structure in Combined Flow Motion Devices | |
Artem Artyukhov, Kristina Berladir, Jan Krmela |
Chemical Vapor Deposition Routes for Fluorine- and Sulfur-containing Activated Carbon Acid Catalysts: Comparison of Fluorination Methods | |
Luidmyla Grishchenko, Alexander N Zaderko, Sofia Chernenko, Anna Vakaliuk, Oleksandr Mischanchuk, Galyna G Tsapyuk, Andrii Yatsymyrskyi, Vitaliy E. Diyuk, Olga Boldyrieva, Vladyslav Lisnyak |
Calcium Copper Titanate Based Nanocomposites for the Photoelectrocatalytic Wastewater Treatment | |
Fida Tanos, Antonio Razzouk, Marc Crettin, Geoffroy Lesage, Mikhael Bechelany |
The Electrophysical and Morphological Properties of Hydrothermal Synthesized CuFe2O4 and CuFe2O4 / Reduced Graphene Oxide Composite | |
Volodymyr Olehovych Kotsyubynsky, Volodymyra Mykhailivna Boichuk, Ruslan Ihorovych Zapukhlyak, Myroslava Andriivna Hodlevska, Mykola Andriiovych Hodlevskyi, Andrii Ihorovych Kachmar |
10. Biomedical Applications
Viricidal Potential of Plasmonic and Metal Oxide Nanostructures: A Review | |
Marco Laurence Mondejar Budlayan, Jonathan Nacalaban Patricio, Susan Del Rosario Arco, Rey Yonson Capangpangan |
Studying Stem Cells With Iron Oxide Nanoparticles | |
V. Budnyk, L. Lukash, O. Papuga, M. Budnyk, S. Lukash, I. Uvarova |
Sorption Composite Based on Hydroxyapatite and Biopolymers for Drainage of Purulent Cavities | |
Mariia Kumeda, Luidmyla Sukhodub, Volodymyr Beilai, Leonid Sukhodub, Sergii Zhdanov |
Bio-functionalization of Electrospun Polymeric Nanofibers by Ti3C2Tx MXene | |
Sergiy Kyrylenko, Oleksandr Oleshko, Veronika Zahorodna, Yulia Zozulia, Viktoriia Kornienko, Maksym Kolesnyk, Vladimir Buranich, Vitalii Balitskyi, Ivan Baginskiy, Oleksiy Gogotsi, Oleg Mishchenko, Alexander Pogrebnjak, Maksym Pogorielov |
Composite on the Base of Natural Silicates (Zeolite, Kaolinite, Montmorillonite) and Plant Raw Material for Food and Cosmetics Purposes: Nanocomposites and Nanohybrids | |
Viktoriia V. Paientko, A. Matkovsky, L. Babenko, N. Liedienov, A. Pashchenko, O. Yesypchuk, V. Kostur, V. Zadorozniy |
11. Theory & Modeling
Physico-chemical Characteristics of Components as a Factor in the Formation of Nanoamorphous Structure in the Al87RE5Ni8(Fe) System | |
Khrystyna Khrushchyk, Mariia Lopachak, Lidiya Boichyshyn, Nataliya Pandiak, Bohdan Kotur, Tetyana Hula |
Shear Acoustic Phonons in AlN/GaN Nanostructures in the Presence of the Piezoelectric Effect | |
Igor Boyko, Halyna Tsupryk, Yurii Stoianov |
Electrical Properties of Doped Germanium Nanofilms | |
Sergiy Luniov, Oleksandr Burban, Yurii Koval |
12. Symposium on Additive Manufacturing and Applications
Predicting the Thermomechanical Properties of the Refractory High-entropy Alloys for Additive Manufacturing-based Fabrication and Mechatronic Applications | |
Vladimir Buranich, Vlad Rogoz, Bogdan Postolnyi, Alexander Pogrebnjak |
Smart Modelling of Aditively Manufactured Metamaterials | |
Conrado Luis Garrido Fernandez de Vera, Daniel Barba |
Crack Arresters Design for Fatigue Strength Improvement of Additively Manufactured Components | |
Paolo Ferro, Stefano Rosso, Gianpaolo Savio, Roberto Meneghello, Filippo Berto, Seyed Mohammed Javad Razavi |
Graded Gyroid Structures for Load Bearing Orthopedic Implants | |
Lorenzo Guariento, Francesco Buonamici, Antonio Marzola, Yary Volpe, Lapo Governi |
3D Printed Lattice Structures: A Brief Review | |
Ande Harshavardhan Reddy, Saritha Davuluri, Dhatreyi Boyina |
Advanced Smoothing for Voxel-based Topologically Optimized 3D Models | |
Antonio Bacciaglia, Alessandro Ceruti, Alfredo Liverani |
3D Printable Pneumatic Valves for Rapidly Manufacturable Mechanical Ventilator Amid COVID-19 Outbreak | |
Hossein Gohari, Dylan Bender, Ahmad Barari |
Producing High Precision Additive Manufacturing Parts by Direct Printing of NURBS Surfaces | |
Hossein Gohari, Ahmad Barari |
Numerical Simulation of Additive Manufacturing Process of Large Parts with Polyurethane Foams | |
Elodie Paquet, Benoit Furet, Sébastien Garnier, Sébastien Le Loch, Alain Bernard |
4D printing: Functional and Microstructure Engineering in Powder Bed Additive Manufacturing | |
Andrey Koptyug, Carlos Botero, William Sjöström, Lars-Erik Rännar, Stefan Roos, Mikael Bäckström |
13. Interdisciplinary Topics
The Study of Micro - and Nanostructural Characteristics of Ostrich (Struthio camelus) Eggshell by the Method of Temperature-Programmable Mass Spectrometry (TPD-MS) | |
Olga Georgiivna Bordunova, Valeriy B. Loboda, Rimma V. Dolbanosova, Petro S. Danylchenko, Sergey M. Danilchenko, Vadym D. Chivanov, Vjacheslav V. Popsui, Andriy O. Stepanenko, Oksana I. Ivanova |
Radiomodifying Effect of X-Ray Radiation on Microflora of Yogurts with Ultradisperse Powders of Beta Vulgaris | |
Maryna M. Samilyk, Anna O. Gelih, Oksana V. Kalinkevich, Natalia V. Bolgova, Igor V. Shelest, Yana V. Trofimenko, Yevgen Zinchenko, Vadim Chivanov, Aleksei Kalinkevich |
Structure Peculiarities of the Surface Layers of Structural Steel under Laser Alloying | |
Olena Berdnikova, Olga Kushnaryova, Artemii Bernatskyi, Tetyana Alekseienko, Yevhen Polovetskyi, Maksym Khokhlov |
Controlling the Microstructural Properties of Magnetic Iron Oxide Synthesized using Brown Seaweed (Sargassum Crassifolium) Extract | |
Jonathan Nacalaban Patricio, Susan Del Rosario Arco, Rey Yonson Capangpangan, Arnold Cafe Alguno, Marco Laurence M. Budlayan |